EXFO FastReporter 2 - Manual (Page 199)

Working with PMD Files
Post Processing Software 189
Changing Fiber Length
Changing Fiber Length
If you are working with .pmd or .pmdb files, you can change the fiber
length to obtain more precision in your analysis.
To change the fiber length:
1. Open a PMD measurement file.
2. Select the measurement or measurements for which you want to
change the fiber length.
3. In the main window, select the Summary tab.
4. Locate the fiber length value under Test Settings and modify it as
needed.
Note: If your file is in .cdpmd format, the fiber length was measured
automatically during the measurement and cannot be edited.