Modifying iolm settings (fr2-fc mode) – EXFO FastReporter 2 User Manual
Page 229
Working with iOLM files
Post Processing Software
219
Modifying iOLM Settings (FR2-FC Mode)
Modifying iOLM Settings (FR2-FC Mode)
In the Summary tab you can view and modify the IOR and backscatter
value for your iOLM measurements.
To modify iOLM settings in the Summary tab:
1. Open an iOLM file.
2. Select the measurement for which you want to view or modify the
iOLM settings.
3. In the Results window, select the Summary tab.
4. In the Results table you can see all the result components:
Link length: Displays the Link length.
Acquisition Status: Displays the status of the acquisition (taken
normally or interrupted).
Link loss: Displays the Link loss.
Link ORL: Displays the Link ORL value.
Analysis version: Displays the version of the application used to
analyze the link. If the measurement is analyzed with FastReporter
2, the analysis version is replaced by the FastReporter 2 version
number. This version is saved only if the file is saved. If the version
is not available, the field remains empty.