Changing pmd settings – EXFO FastReporter 2 User Manual
Page 196
Advertising
Working with PMD Files
186
FastReporter 2
Changing PMD Settings
Changing PMD Settings
You can change the thresholds you want to use for the analysis:
The threshold from the measurement file is the one that was used
during the actual PMD test. When you select this threshold, you cannot
modify the values in the threshold table.
The threshold from the application is a threshold set by FastReporter 2,
which you can select and modify.
To change PMD settings:
1. On the Settings menu, select PMD.
2. Select the type of threshold to use for your analysis.
Advertising