EXFO FastReporter 2 - Manual (Page 231)

Working with iOLM files
Post Processing Software 221
Modifying the Splitter Ratio Information
Modifying the Splitter Ratio Information
The Link Definition table displays the information about the expected
number of splitters on the link and their respective splitter ratio. You can
modify the splitter ratios so that they are no longer included in the pass/fail
calculation and have the application discover the ratios automatically.
The splint ratios are sequential, in the sense that if you set the first in
sequence to None, any subsequent splitter ratio is automatically set to
None as well.
Note: Link definition on an iOLM measurement is available for display, but it is in
read-only mode.
To modify the splitter ratio information:
1. Open an iOLM configuration file.
2. In the Results window, select the Summary tab.
3. You can view and modify the splitter ratio stage 1, 2, and 3 fields in the
Link Definition table.
4. Select 1:? if you know that a splitter is present, but you do not know its
splitter ratio. The iOLM discovers the splitter ratio automatically and the
element will not be tested for pass/fail.
Note: The splitter ratios are defined stage wise, depending on how they are
defined in the network.