Labconco WaterPr BT Systems 90151 Series - Manual (Page 15)

7
Installation
Preparation of the System
A • Open the front cover.
(this may require to remove the final filter)
Locate the tie wrap used to hold the Booster Pump in place during
shipping.
B • Press on the tab of the tie wrap.
Remove the tie wrap and discard.
C • Locate the protective foam found at the UV lamp cable and discard.
Connection of Tubing for a WaterPro® BT (UV) System
A • Rotate the WaterPro® BT (UV) System so you can see the back of the
system (see photo A).
1. Feedwater tubing
2. Reject tubing
3. Overflow tubing
4. Tank outlet