Labconco WaterPr BT Systems 90151 Series - Manual (Page 57)

Troubleshooting
49
G • Close the front cover (G).
The system will now go into FILLING TANK mode.
H • Let the tank fill up to the 100% level (H).
I • Let the system stand for 1 hour for effective bacteria elimination.
• (After 1 hour) Remove the Final Filter. Install the Barbed Fitting and
Clear Tubing (I).
J • Perform an EMPTY TANK (C03) to dispense all the water in the
tank (J).
Continued on next page