Labconco WaterPr BT Systems 90151 Series - Manual (Page 38)

Using the WaterPro® BT System
30
Dispensing DISPENSING mode is displayed when
Product Water is being dispensed.
DISPENSING mode occurs because the
Dispensing Button was pressed down. The
Distribution Pump turns on.
The resistivity and temperature of the
Product Water is displayed during
dispensing. The resistivity and temperature
remain displayed for up to 10 seconds after
dispensing is stopped.
Auto-Dispensing AUTO-DISPENSING mode is displayed
when selecting menu option F01.
AUTO-DISPENSING mode is used to
dispense pre-set volumes of water from the
WaterPro® BT System. The Distribution
Pump turns on.
The amount of water dispensed and the
resistivity are shown while water is being
dispensed. The resistivity remains displayed
for up to 10 seconds after dispensing is
stopped.