Labconco WaterPr BT Systems 90151 Series - Manual (Page 58)

Troubleshooting
50
K • Once the tank is empty, the system will now go into FILLING TANK
mode. Let the tank fill up to the 100% level (K).
L • Perform an EMPTY TANK (C03) again to dispense all the water in the
tank (L).
M • Open the front cover (this may require to remove the final filter) to
let the system go into STANDBY mode (M).
The Filter Pack cartridge, the Vent Filter and the Final Filter will now
have to be replaced. Refer to the earlier Maintenance sections for
replacement instructions.