Labconco XPert Nano Enclosures 38876 Series - Manual (Page 13)

Product Service 1-800-522-7658 8
Chapter 3:
Getting Started
Now that the site for your XPert Nano Enclosure is properly prepared, you are
ready to unpack, inspect, install, and validate your system. Read this chapter to
learn how to:

Unpack and move the enclosure.

Set up the enclosure with the proper supporting structure and work surface.

Connect to an exhaust system if applicable.

Connect the electrical supply.

Set the face velocity with the speed control adjustment.

Arrange validation for the enclosure.
Depending upon which model you are installing, you may need common
mechanical and electrical installation tools in addition to wrenches, ratchets,
sockets, a nut driver set, a large flat-blade screwdriver, a power drill or
screwdriver, and a carpenter level to complete the instructions in the chapter.
Each enclosure model weighs between 173 to 443 lbs. each
(78.47 to 200.94 kg). The shipping container allows for lifting
with a mechanical lift truck or floor jack. If you must lift the
enclosure manually, follow safe-lifting guidelines.
Do not lift
by the front air foil .
!