Labconco XPert Nano Enclosures 38876 Series - Manual (Page 3)

ORIGINAL INSTRUCTIONS
T
ABLE
O
F
C
ONTENTS
CHAPTER 1: INTRODUCTION
1
Typographical Conventions 1
CHAPTER 2: PREREQUISITES
3
Support, Vibration & Movement Requirements 3
Temperature Variation Requirements 4
Humidity and Static Electricity Requirements 4
Location and Air Current Requirements 5
Exhaust and Blower Requirements 6
Electrical Requirements 7
Space Requirements 7
CHAPTER 3: GETTING STARTED 8
Unpacking the Enclosure 9
Stand and Cabinet Installation 10
Connecting to the Exhaust System (Optional) 11
Connecting the Electrical Supply Source 14
Set the Face Velocity with the Speed Control Adjustment 14
CHAPTER 4: HIGH PERFORMANCE FEATURES AND
SAFETY PRECAUTIONS 16
High Performance Features 16
Safety Precautions 20
CHAPTER 5: USING THE NANO ENCLOSURE
23
Routine Daily Work Procedures 23
ULPA Filter Applications, Suitability & Guidelines 24
Optional Ionizer 25
Prohibited Acid Use 26
CHAPTER 6: MAINTAINING THE NANO ENCLOSURE
27
Routine Maintenance Schedule 27
Decontamination 28
Determination of When to Replace ULPA Filters 28
How to Install New ULPA Filter with the Bag-In/Bag-Out 29
Filter Leak Test 30
Setting Inflow Face Velocity with the Speed Control Adjustment 32
Calibrate and Operate the Airflow Monitors 32