Chapter 7: accessorizing the nano enclosure – Labconco XPert Nano Enclosures 38876 Series User Manual
Page 49
Product Service 1-800-522-7658
44
Chapter 7:
Accessorizing the Nano
Enclosure
There are several ways to accessorize and modify the filtered enclosure for your
individual requirements. These include the addition of airflow monitors; exhaust
transition kits, remote blowers, exhaust dampers, filters, storage cabinets and
utility shelf kit.
1.
Guardian™ 1000 Digital Airflow Monitor or Guardian™ LED
Airflow Monitor
The Guardian Digital 1000 Airflow Monitor or Guardian LED Airflow
Monitor allows you to continuously monitor airflow through the enclosure.
Either monitor is usually provided with the XPert enclosures.
Description
Order Part #’s
Individual Parts Required
Guardian Airflow Monitor
115V or 230V
1 ea.
3811500
Airflow Monitor Printed Circuit Board
1 ea.
3910700
Airflow Sensor w/ Connector
2 ea.
1885405
#6-32 x .31" Phillips machine screw to
mount Airflow Monitor Circuit Board
2 ea.
1891808
#6-32 x .50" Phillips thread cutting screw to
mount Airflow Sensor
Guardian Digital 1000
Airflow Monitor
115V 1 ea.
3908500
115V Guardian Digital Monitor, Airflow
Sensor, Sensor Cable, and 15 VDC power
supply
230V 1 ea.
3908501
230V Guardian Digital Monitor, Airflow
Sensor, Sensor Cable, and 15 VDC power
supply
Add appropriate Front Panel with cutout to mount Digital 1000 Airflow
Monitor
1 ea.
3904803
2' Front Panel w/ cutout
or
1 ea.
3904804
3' Front Panel w/ cutout
or
1 ea.
3904805
4' Front Panel w/ cutout