Nisus Writer Pro - Manual (Page 381)

Polishing & Managing Documents 361
Print odd pages, then even pages
You may want to print your document on both sides of a piece of paper. Make sure your margins
are correct by following the instructions in “Mirror page placement” on page 129. Make sure your
margins appear as you want them as explained in “Set the margins of the sections of your
document” on page 127.
1. Choose the menu command File > Print….
2. Choose Paper Handling from the third (un-named) pop-up menu inside the Print dialog.
3. Choose Automatic or Normal in the Page Order pop-up menu.
4. Choose Odd only from the Pages to Print pop-up menu.
5. Click Print.
6. When the print job has completed, reload the stack of paper in the printer for printing on the
other side.
If the total number of pages is odd, leave out the last page.
7. Choose the menu command File > Print….
8. Choose Paper Handling from the third (unnamed) pop-up menu inside the Print dialog.
9. Choose Automatic or Normal in the Page Order pop-up menu.
10. Choose Even only from the Pages to Print pop-up menu.
11. Click Print.
Add a “watermark” to your document
You may want to share an early version of your document with others and make sure that they
know it is a draft, or confidential. To do this you would want to add a “watermark”.
Because watermarks appear on a page of paper (or PDF file) they are not visible when working in
Draft View.
1. Choose the menu command Tools > Watermark….
The Watermark dialog illustrated in Figure 397 opens set to No watermark. If you are working
in Draft View and choose the menu command Tools > Watermark…, Nisus Writer Pro
automatically switches to Page View until you click Cancel or Apply.
Figure 397
The Watermark dialog when first opened