Nisus Writer Pro - Manual (Page 467)

Appendices 447
▸ Show Underline Colors
Opens the Colors panel enabling you to set the color of the
Underline.
Strikethrough
Choose commands from the menu Format > Strikethrough to apply and/or
remove various strikethrough attributes to or from selected text.
▸ None Removes any and all Strikethrough attributes from selected text
whether the strikethrough is part of the style’s definition as set in
the Style Sheet view or applied in addition to the style.
▸ Remove Strikethrough Attribute
Removes any additional strikethrough attributes applied to the text
that are not part of the style’s definition as set in the Style Sheet
view.
When in the Find/Replace window this command displays as Any
Strikethrough. In this instance it functions the same as having the
Attribute Sensitive checkbox unchecked (for that particular
attribute).
▸ Single or Double Draws either a single or a double line through selected text.
▸ Show Strikethrough Colors
Opens the Colors panel enabling you to set the color of the
Strikethrough.
Baseline Choose commands from the Baseline submenu to raise or lower selected text.
▸ No Super/Sub Returns the selected Super or Subscripted text to the baseline of the
surrounding text (unless some other baseline attribute has been
added).
▸ Remove Super/Sub Attribute
Returns the selected Super or Subscripted text to the baseline of the
surrounding text (unless some other baseline attribute has been
added).
When in the Find/Replace window this command displays as Any
Super/Sub. In this instance it functions the same as having the
Attribute Sensitive checkbox unchecked (for that particular
attribute).
▸ Superscript and Subscript
Places the current selection five points above or below the baseline
of the surrounding text and makes the text appear smaller (without
changing the actual size).
▸ Remove Baseline Attribute
Returns the selected text to the baseline of the surrounding text
(unless some other baseline attribute has been added).
When in the Find/Replace window this command displays as Any
Baseline. In this instance it functions the same as having the
Attribute Sensitive checkbox unchecked (for that particular
attribute).
▸ Raise Baseline and Lower Baseline
Raises or lowers the current selection in one point increments above
or below the current height.
▸ Raise Baseline By… and Lower Baseline By…
Enables you to raise or lower selected text by a specified number of
points.
Ligature Choose commands from the Ligature submenu to cause selected text to use
ligatures (characters (such as æ) consisting of two or more letters or characters
joined together). Various fonts support more or less ligatures.
▸ Use Default Uses the basic set of ligatures built into “most” fonts.
▸ Remove Ligature Attribute
Removes the ligature attribute from selected text (unless some other
ligature attribute has been added).
When in the Find/Replace window this command displays as Any
Ligature. In this instance it functions the same as having the
Attribute Sensitive checkbox unchecked (for that particular
attribute).
▸ Use None Prevents any connecting of characters.
▸ Use All Uses the greatest available number of ligatures built into a font.