Pilz PSSnet SHL 8T MRP - Manual (Page 14)

Ring Redundancy
14
2.1 Example of HIPER-Ring
PSSnet SHL - Redundancy Configuration
Pilz GmbH & Co. KG, Felix- Wankel Str. 2, 73760 Ostfildern
Note: As an alternative to using software to configure the HIPER-Ring, with
devices PSSnet SHL you can also use a DIP switch to enter a number of set-
tings. You can also use a DIP switch to enter a setting for whether the con-
figuration via DIP switch or the configuration via software has priority. The
state on delivery is “Software Configuration”.
Note: Configure all the devices of the HIPER-Ring individually. Before you
connect the redundant line, you must complete the configuration of all the
devices of the HIPER-Ring. You thus avoid loops during the configuration
phase.