Pilz PMCprimo Drive2.01/21/5/230-480V - Manual (Page 5)

4 Safety Guidelines
4 Safety Guidelines
● When commissioning, you must ensure that neither the controllers nor the amplifiers
present any risk to persons, plant or machinery. Appropriate protection and
precautionary measures must be put in place.
● To avoid personal injury and material damage, only qualified, trained personnel should
work on the devices.
● Only specialist staff with extensive knowledge of drive technology and control
engineering should be permitted to program a running drive online. Data stored on
data media is not protected from unintended changes by third parties. Data must be
checked for accuracy before it is loaded on to the hardware.
● The installation and operating instructions must be read carefully and all safety
regulations observed before installation and initial operation as danger to personnel and
damage to machinery may be caused.
● Only qualified and well-trained specialists who are familiar with the transportation,
installation, initial operation, maintenance and operation of the units as well as with the
relevant standards may carry out the corresponding works.
● Technical data and indications (Type tag and documentation) are to be kept absolutely.
User Manual for Setup Software PDrive Page 5