7installation – Pilz PMCprimo Drive2.01/21/5/230-480V User Manual
Page 8
7 Installation
7
Installation
7.1
Hardware requirements
Minimum specification for the PC:
Operating system
Windows 2000, XP, Vista or 7
Hardware
Minimum requirements of operating system
Interface
one free serial interface
Ethernet interface (optional)
7.2
Installation under Microsoft Windows
The PC interface (X6, RS232) of the servo amplifier is connected to the serial interface of the
PC.
You can order the necessary programming cable from us or make one up yourself. The pin
assignment can be found in the installation manual of the servo amplifiers.
Start your PC and insert the Motion Control Tools-CD into the CD-ROM drive. The installation
software will start automatically. Otherwise start MInstall.exe on the CD-ROM.
Click on „Install Motion Control Tools“ and follow the instructions.
Page 8
User Manual for Setup Software PDrive