The gpio tab, Character lcd and display, User dip switches – Altera Cyclone V GT FPGA User Manual
Page 29: The gpio tab –7, Character lcd and display –7 user dip switches –7
Chapter 6: Board Test System
6–7
Using the Board Test System
September 2014
Altera Corporation
Cyclone V GT FPGA Development Kit
User Guide
The GPIO Tab
The GPIO tab allows you to interact with all the general purpose user I/O
components on your board. You can write to the character LCD, read DIP switch
settings, turn LEDs on or off, and detect push button presses.
shows the
GPIO
tab.
The following sections describe the controls on the GPIO tab.
Character LCD and Display
The Character LCD controls allow you to type in text strings that appear on the
character LCD on your board after clicking Display.
1
If you exceed the 16 character display limit on either line, a warning message appears.
User DIP Switches
Displays the current positions of the switches in the user DIP switch bank. Change the
switches on the board to see the graphical display change accordingly.
Figure 6–4. The GPIO Tab