The hsmb tab, The hsmb tab –15 – Altera Cyclone V GT FPGA User Manual
Page 37
Chapter 6: Board Test System
6–15
Using the Board Test System
September 2014
Altera Corporation
Cyclone V GT FPGA Development Kit
User Guide
Data Type
—Specifies the type of data contained in the transactions. The following
data types are available for analysis:
■
PRBS7
—Pseudo-random 7-bit sequences
■
PRBS15
—Pseudo-random 15-bit sequences
■
PRBS23
—Pseudo-random 23-bit sequences
■
PRBS31
—Pseudo-random 31-bit sequences
■
HF
—Highest frequency divide-by-4 data pattern 10101010
■
LF
—Lowest frequency divide-by-4 data pattern 11110000
The HSMB Tab
The HSMB tab (
) allows you to perform loopback tests on the HSMB
transceiver (XCVR) and HSMB CMOS ports
.
HSMB stands for high-speed mezzanine
card for Port B.
1
You must have the loopback HSMB installed on the HSMC Port B connector for this
test to work correctly.
Figure 6–9. The HSMB Tab