Altera Cyclone V GT FPGA - Manual (Page 30)

6–8 Chapter 6: Board Test System
Using the Board Test System
Cyclone V GT FPGA Development Kit September 2014 Altera Corporation
User Guide
User LEDs
Displays the current state of the user LEDs. Click the graphical representation of the
LEDs to turn the board LEDs on and off. Click All to turn on and off all of the user
LEDs at once.
Push Button Switches
Displays the current state of the board user push buttons. Press a push button on the
board to see the graphical display change accordingly.
The Flash Tab
The Flash tab allows you to read and write flash memory on your board. Figure 6–5
shows the Flash tab.
The following sections describe the controls on the Flash tab.
Figure 6–5. The Flash Tab