Subaru 2003 Legacy - Manual (Page 201)

5
Audio
5-17
– CONTINUED –
This dial is used for bass/middle/treble controls when the “AUDIO”
button
2
is in the depressed position. It is also used for fader/balance
controls when the “BAL” button
3
is in the depressed position.
Display Control mode
HB5036BA
Turn counterclockwise Turn clockwise
BASS Bass control For less bass For more bass
MIDDLE Middle note
control For less middle note For more middle note
TREBLE Treble control For less treble For more treble
FADER Fader control To increase rear speaker
volume and decrease
front speaker volume
To increase front speaker
volume and decrease
rear speaker volume
BALANCE Balance control To increase left speaker
volume and decrease
right speaker volume
To increase right speaker
volume and decrease left
speaker volume
VOLUME Volume control For less volume For more volume
n Tone control
The volume control dial
1
normally function as volume control. The
dial become a control for Bass, Middle note or Treble when you select
the appropriate tone control mode.
Choose desired level for each mode by turning the volume control
dial. The control function returns to volume control mode after about 5
seconds.
To change control modes: Each brief press of the “AUDIO” button
2
changes control modes in the following sequence starting from
bass control mode. (When the radio is first turned on, the control
mode is in the volume control.)