Jlicense plate light – Subaru 2003 Legacy User Manual
Page 436
Advertising
11-64
n
Back-up and brake/tail light bulbs
HBB025BA
HBB026BC
1. Unlatch the rear finisher light cover by moving the knob upward.
Open the cover up.
2. Remove the bulb socket from the rear finisher light assembly by
turning it counterclockwise.
3. Remove the bulb from the socket by pushing it and turning coun-
terclockwise. Install a new bulb in the socket.
4. Set the bulb holder into the rear finisher light assembly and turn it
clockwise until it locks.
5. Close the cover and latch the lock.
J
License plate light
HBB027BA
HBF013EA
1. Remove the mounting screws using a phillips screwdriver.
Advertising
This manual is related to the following products: