Subaru 2003 Legacy - Manual (Page 212)

5-28
To change control modes: Each brief press of the “BASS/TREB” but-
ton
8
changes control modes in the following sequence starting from
bass control mode. (When the radio is first turned on, the control
mode is in the volume control.)
Bass Treble Volume
(BASS) (TREB) (VOL)
n Fader and balance control
The volume control dial
7
normally function as volume control. The
dial become the controls for Fader or Balance when you select the
appropriate fader and balance control mode.
Choose desired setting for each mode by turning the volume control
dial. The control function returns to volume control mode after about 5
seconds.
To change control modes: Each brief press of the “FAD/BAL” button
6
changes control modes in the following sequence starting from
fader control mode. (When the radio is turned on, the control mode is
in the volume control.)
Fader Balance Volume
(FAD) (BAL) (VOL)
n Display illumination dimness cancellation (BRIGHT)
The brightness of the radio display dims when the light switch is in the
“p” or “w” positions. If this makes the display difficult to read,
press the dial
7
for more than two seconds to return the display to
original brightness.
Subsequently pressing the dial
7
again for more than two seconds or
if you can safely do so, turning the light switch to the OFF position
and back to the “p” or “w” position makes the radio display dim
again.