Jshift lock release – Subaru 2003 Legacy User Manual

Page 270

Advertising
background image

7-20

mph (km/h)

Vehicle

type

Brighton L

OUTBACK

Position

type

Brighton, L

2.5 liter

3.0 liter

1

35 (56)

31 (50)

35 (57)

2

64 (103)

62 (100)

69 (111)

3

100 (161)

102 (164)

111 (178)

NOTE

In order to prevent over-revving during deceleration of the
vehicle, the transmission will remain in the current gear if the
speed of the vehicle is in excess of the Maximum Allowable
Speed for the gear to which the selector lever has been moved.

B

Driving tips

D Always apply the foot or parking brake when the vehicle is
stopped in the “D”, “3”, “2”, “1” or “R” position.
D Always set the parking brake when parking your vehicle. Do not
hold the vehicle with only the transmission.
D Do not keep the vehicle in a stationary position on an uphill grade
by using the “D”, “3”, “2”, or “1” position. Use the brake instead.
The engine may, on rare occasions, knock when the vehicle rapidly
accelerates or rapidly pulls away from a standstill. This phenomenon
does not indicate a fault.

J

Shift lock release

If the selector lever does not move from the “P” position with the brake
pedal depressed and the ignition switch in the “ON” position, perform
the following steps:
To override the shift lock:
1. Set the parking brake and stop the engine.
2. Take out the screwdriver from the tool bag.
3. Remove the cover by prying on the edge with the regular screwdriver.

Advertising
This manual is related to the following products: