Preparing to drive – Subaru 2003 Legacy User Manual

Page 259

Advertising
background image

7

Starting and operating

7-9

– CONTINUED –

than three. Under this condition, the vehicle operator should be
instructed to drive his/her vehicle for a few days to set the monitors and
return for an emission re-inspection.
D Owners of rejected or failing vehicles should contact their Subaru
Dealer for service.

Preparing to drive

You should perform the following checks and adjustments every day be-
fore you start driving.

1. Check that all windows, mirrors, and lights are clean and unob-
structed.
2. Check the appearance and condition of the tires. Also check tires for
proper inflation.
3. Look under the vehicle for any sign of leaks.
4. Check that the hood, trunk and rear gate are fully closed.
5. Check the adjustment of the seat.
6. Check the adjustment of the inside and outside mirrors.
7. Fasten your seatbelt. Check that your passengers have fastened their
seatbelts.
8. Check the operation of the warning and indicator lights when the igni-
tion switch is turned to the “ON” position.
9. Check the gauges, indicator and warning lights after starting the en-
gine.

NOTE

Engine oil, engine coolant, brake fluid, washer fluid and other fluid
levels should be checked daily, weekly or at fuel stops.

Advertising
This manual is related to the following products: