Subaru 2003 Legacy - Manual (Page 389)

11
Maintenance and service
11-17
– CONTINUED –
HBB059BB HBB006BB
3. Loosen the radiator cap to drain the coolant from the radiator. Then
drain the coolant from the reserve tank. Tighten the drain plug secure-
ly.
HBB004FB HBB007CB
4. Slowly pour the coolant and fill to the radiator filler neck and to the
reserve tank’s “FULL” level mark. Do not pour the coolant too quickly,
as this may lead to insufficient air bleeding and trapped air in the sys-
tem.
Coolant capacity (Guideline):
2.5 liter models MT. 7.2 US qt (6.8 liters, 6.0 Imp qt)
AT.
7.1 US qt (6.7 liters, 5.9 Imp qt)
3.0 liter models 8.4 US qt (7.9 liters, 7.0 Imp qt)