Subaru 2003 Legacy - Manual (Page 219)

5
Audio
5-35
– CONTINUED –
B
How to unload CDs from the player
n Ejecting a CD from the player
Of the discs loaded, you can select and remove only one disc.
1. Press the “DISC SELECT” button
U
of the disc whose “DISC” indi-
cator is ON.
2. Press the “EJECT” button
W
. Then the “DISC” indicator associated
with the disc you have selected will blink, and the disc will be ejected.
To remove more discs in succession, repeat Steps 1 and 2.
n Ejecting all discs from the player (All disc ejection mode)
1. If you continue to press the “EJECT” button
W
, the player will pro-
duce beep sound and will enter the all disc ejection mode.
2. Remove the disc that has been ejected. The other discs loaded
will then be ejected one after another. If you do not remove the disc
that has been ejected, the “All disc ejection mode” will be canceled.
NOTE
Avoid driving the vehicle with a CD sticking out, because vibra-
tion might make it fall out.
OnStar

system operation (models with OnStar

sys-
tem)
When the OnStar system operates and a call is initiated, the message
”PHONE” will be shown on the display, and the speakers will automati-
cally switch over to the incoming voice signal.
NOTE
A call will not be suspended even if the ignition key is turned to the
Off position. In such a case, however, the audio system will turn off
when the call is ended.