Subaru 2003 Legacy - Manual (Page 63)

1
Seat, seatbelt and SRS airbags
1-39
– CONTINUED –
HS1078BA HB1088BA
You will find marks “ ” at the bottom of the rear seat seatbacks.
These marks indicate the positions of the lower anchorages (bars).
Each lower anchorage is located where the seat cushion meets the
seatback.
CAUTION
When you install a child restraint system, follow the manufactur-
er’s instructions supplied with it. After installing the child restraint
system, check to ensure that it is held securely in position. If it is
not held tight and secure, the danger of your child suffering per-
sonal injury in the event of an accident may be increased.
1. Use the “Child” marks to locate the two lower anchorages (bars)
for the position where you want to install the child restraint system.
2. While following the instructions supplied by the child restraint sys-
tem manufacturer, connect the connectors of the child restraint sys-
tem to the lower anchorages.
When the connectors are fastened, make sure that the adjacent seat-
belts are not caught.
If your child restraint system is of a flexible attachment type (which
uses tether straps to connect the child restraint system proper to the
lower anchorages), firmly tighten the straps after connecting the con-
nectors.
3. Connect the top tether hook to the tether anchorage and firmly
tighten the tether.