Subaru 2003 Legacy - Manual (Page 352)

9-14
HB9031BB
1
Connect one jumper cable to the positive (+) terminal on the
discharged battery.
2
Connect the other end of the jumper cable to the positive (+)
terminal of the booster battery.
3
Connect one end of the other cable to the negative (–) terminal
of the booster battery.
4
Connect the other end of the cable.
2.5 liter models: To the engine lifting bracket.
3.0 liter models: To the strut mounting nut.
Make sure that the cables are not near any moving parts and that
the cable clamps are not in contact with any other metal.
5. Start the engine of the vehicle with the booster battery and run it at
moderate speed. Then start the engine of the vehicle that has the dis-
charged battery.
6. When finished, carefully disconnect the cables in exactly the re-
verse order.