Subaru 2003 Legacy - Manual (Page 295)

7
Starting and operating
7-45
– CONTINUED –
B
To set cruise control
HG0312 HB3002BB
Cruise control lever
1. Push the “CRUISE” main switch. The indicator light on the switch
will come on.
2. Depress the accelerator pedal until the vehicle reaches the de-
sired speed.
3. Push the control lever downward in the “SET, COAST” direction
and release it. Then release the accelerator pedal.
The vehicle will maintain the desired speed.
Vehicle speed can be temporarily increased while driving with the
cruise control activated. Simply depress the accelerator pedal to ac-
celerate the vehicle. When the accelerator pedal is released, the ve-
hicle will return to and maintain the previous cruising speed.
B
To temporarily cancel the cruise control
There are four ways to cancel the cruise control temporarily:
D Depress the brake pedal.
D Pull the control lever in the “CANCEL” direction. (if so equipped)
D Depress the clutch pedal (manual transmission vehicles only).
D Shift the selector lever into the “N” position (automatic transmis-
sion vehicles only).
To resume the cruise control after it has been temporarily canceled
and with vehicle speed of about 20 mph (32 km/h) or more, push the
control lever upward in the “ACCEL, RESUME” direction to return to
the original cruising speed automatically.