Subaru 2003 Legacy - Manual (Page 425)

11
Maintenance and service
11-53
– CONTINUED –
HSB011BB HS0204
Good Blown
1. Turn the ignition switch to the “LOCK” position and turn off all electri-
cal accessories.
2. Remove the cover.
(For behind the coin tray: open the coin tray and pull it horizontally to
remove it.)
3. Determine which fuse may be blown. The back side of each fuse box
cover and the “Fuse and circuits” section in chapter 12 in this manual
show the circuit for each fuse.
HS0207
Fuse puller
4. Pull out the fuse with the fuse puller.
5. Inspect the fuse. If it has blown, replace it with a spare fuse of the
same rating.
6. If the same fuse blows again, this indicates that its system has a
problem. Contact your SUBARU dealer for repairs.