Iu - immediate voltage, Command details, Examples – Applied Motion RS-232 User Manual
Page 112
112
920-0002 Rev. I
2/2013
Host Command Reference
IU - Immediate Voltage
Compatibility: All drives
Requests present value of the DC bus voltage, +/-5%. The voltage reads out in 0.1 volts resolution. The drive
will fault when the DC bus voltage reaches a specified maximum value. An Alarm will be set when the DC Bus
voltage is less then a minimum value. (See hardware manuals for details).
Command Details:
Structure
IU
Type
IMMEDIATE
Usage
READ ONLY
Non-Volatile
NO
Register Access
“u” (069)
Units
0.1 Volts DC, +/-5%
Examples:
Command
Drive sends
Notes
If the IF command is set with Parameter #1=H
IU
IU=01E2
DC supply voltage is 48.2 Volts
IU
IU=067E
DC bus voltage is 166.2 Volts
If the IF command is set with Parameter #1=D
IU
IU=482
DC supply voltage is 48.2 Volts
IU
IU=1662
DC bus voltage is 166.2 Volts