BINDER M 53 - Manual (Page 22)

M (E2) 10/2014 page 22/71
6.2 Overview of program controller MB1 displays
The main operation level contains the following
different displays:
•
Normal display (Idle Mode or Manual Mode or
Program Mode)
• Event List
• Chart recorder function
• Contact page
Button VIEW -> allows toggling between the dis-
plays.
The NORMAL DISPLAY enables comparison of the
current temperature (W) to the set-point value (X) or
shows the fan working rate.
CONTACT PAGE
BINDER Service contact display.
NORMAL DISPLAY Idle Mode
W X
08:43:55 15.12.13
CONFIG VIEW-> PGM
TEMP
0.0
26.8
°C
HAND
or
W X
08:43:55 15.12.13
CONFIG VIEW-> PGM
FAN SPEED
50
%
HAND
No heating. The actual value (X) approximates ambient temperature. Fan operates at a 50% rate.
NORMAL DISPLAY Manual Mode
W X
08:43:55 15.12.13
CONFIG VIEW-> PGM
TEMP
40.0
36.8
°C
HAND
The temperature value is maintained according to
the previous entered set-point (W).
NORMAL DISPLAY Program Mode
W X
08:43:55 15.12.13 PROGRAM 01/SEC1 00:09:59
CONFIG HAND VIEW-> PGM
TEMP
40.0
36.8
°C
AUTO
A temperature program entered before via a pro-
gram table is run.
EVENT LIST
Overview over the last 16 events or error occur-
rences of the unit.
CHART RECORDER FUNCTION
Graphical display of the current temperature val-
ues and review of the previous measurements on
a historical display. A memory interval of 5s corre-
sponds to a supervision period of 2.5 days.
08:43:55 15.12.13
Service Hotline
International: +49 7462 205 555
USA Toll Free: +1 866 885 9794
or +1 631 224 4340
: +7 495 988 1516 РоссияиСНГ
[email protected]
www.binder-world.com
CONFIG VIEW-> VIEW->
Best conditions for your success
08:43:55 15.12.13 08:43:55 15.12.13