BINDER M 53 - Manual (Page 37)

M (E2) 10/2014 page 37/71
9.7 Starting a previously entered program
The program has to be previously entered via a programming table (chap. 9.3).
Idle mode
No heating function.
Fan working at 50% rate
(factory setting)
Select a program place
Delayed program start
Start with section …
Remaining time of the se-
lected start section
Arrow buttons to select the parameter to be set
Press the “AUTOMATIC”
button to start the pro-
gram
Arrow buttons to select the program
9.8 Deleting a program
Select a program via the arrow keys
Hit button
DEL PGM to delete the selected program.
To delete individual program sections (table lines) use the inquiry display for adding or deleting program
sections (chap. 9.1).
089:12:13 15.12.13
Program start
Program Prog 01
Pre start time 00:00:00
Section 1
Res time 00:00:00 Programm
PROG 01
PROG 02
PROG 03
PROG 04
PROG 05
PROG 06
PROG 07
PROG 08
PROG 09
PROG 10
PROG 11
PROG 12
PROG 13
PROG 14
W X
09:11:55 15.12.13
CONFIG VIEW-> PGM
TEMP
0.0
26.8
°C
HAND
09:12:02 15.12.13
Program start
Program Prog 01
Pre start time 00:00:00
Section 1
Rest time 00:00:00
DEL PGM
09:13:47 15.12.13
Prog. Select. Fr. Abs. 372
Prog 1 PROG 01 ►
Prog 2 PROG 02 ►
Prog 3 PROG 03 ►
Prog 4 PROG 04 ►
Prog 5 PROG 05 ►
Prog 6 PROG 06 ►
Prog 7 PROG 07 ►
Prog 8 PROG 08 ►
Prog 9 PROG 09 ►
Prog10 PROG 10 ►
Prog11 PROG 11 ►
Prog12 PROG 12 ►
Prog13 PROG 13 ►
Prog14 PROG 14 ►
Prog15 PROG 15 ►
Prog16 PROG 16 ►
Prog17 PROG 17 ►
Prog18 PROG 18 ►
Prog19 PROG 19 ►
P 20 PROG 20