Commissioning – Casella CEL Nomad portable weather station User Manual
Page 14
(Set it at right angles to the centre of the sun’s anticipated course,
when longer measurements are to be performed.) Then lock the wheel
again.
28.
Remove the protective cover from
the solar panel, and keep it in a safe place.
Security
29.
For additional security, the winged
locking-screws on the tripod can be replaced by Allen screws
(supplied), the case padlocked (not supplied) and the case clamp
screws locked with additional Allen screws (supplied).
The Nomad is now deployed and ready for operation.
Dismantling the system and re-packing it in the carrying bags will be
the reverse of this procedure. Make sure the cover is replaced on the solar
panel, and the locking wheel is tightened to prevent the panel moving in transit.
When dismantling your system, if it is wet ensure that all
components are dried before re-placing them in the carrying bags, or on
return to the laboratory or office. Make sure the bags are dried too.
Commissioning
Page 14 of 68
NOMAD Portable Weather Station
Users Handbook