Casella CEL Nomad portable weather station - Manual (Page 27)

2. On the Open dialog, click the name of the configuration file you want
to display, (for example display.onl which is the standard
configuration supplied for Nomad systems).
The first screen page of the specified configuration will be displayed.
When using the standard Nomad configuration, the Instantaneous
values page will be shown.
(When the selected stations are linked via radio, the default setting
transmits real-time data every 20 seconds.)
3. Display further pages from the selected configuration by selecting the
View menu, clicking the Pages option then selecting the required
page from the flyout menu.
The following pages are available from the standard Nomad
configuration:
Instantaneous Values
2 minute averages
10 minute averages
Map overlay
Real-time windrose
Temp. / humidity graph
Pressure graph
Solarimeter graph.
4. To make the application switch automatically between selected pages
in real time mode, click the Auto switch... option on the Pages menu.
The Automatic page switching dialog is displayed with the following
options.
Tick box Enables automatic page switching.
Page numbers Identifies the page numbers to be
displayed and the order in which they will be
displayed.
Time interval Specifies a time interval between page
changes (in seconds).
5. Click the check box to enable page switching.
6. Enter the required page numbers separated by commas “ , ” in the
order they are to be displayed, for example: 1, 4, 5, 2, 3.
7. Enter a suitable time interval, in seconds, for each page to be
displayed.
8. Click OK to confirm your choices.
The remaining options on the View menu are described in later
Sections.
Online Pro Software
Page 27 of 68
NOMAD Portable Weather Station
Users Handbook