d&b D80 - Manual (Page 31)

Speaker
1. On the bottom left of the «Output» tab, select the «Speaker»
navigation button to enter the Speaker setup subscreen.
2. Choose the desired speaker setups for all channels and
confirm each selected setup by tapping the «OK» button right
next to the «Speaker» selection field.
3. Define the LoadMatch settings, if applicable and desired,
correspondingly.
4. After defining all settings, exit the subscreen by tapping the
Home button ( ).
Note: A detailed description of the Speaker setup and
LoadMatch settings is given in the reference chapter
Þ Chapter 10.8. "Speaker" on page 59.
4. Remote
1. On the Home screen, tap the Device view button to enter the
Device setup menu.
2. Tap the «Remote» tab and define your desired Remote settings
correspondingly.
Note: A detailed description of the remote settings is given in
the reference chapter Þ Chapter 9.4. "Remote"
on page 41.
As all the configurations and settings mentioned above can
also be defined remotely, it depends on how you wish to
proceed whether defining the Remote settings is the last or the
first step when configuring your basic settings.
After defining all settings, exit the subscreen by tapping the Home
button ( ) and carry on with the individual channel settings.
5. Channel setup
1. On the Home screen, tap the Channel view button of the first
channel (A) or pair of channels (A/B) to enter the Channel
setup.
2. Define your individual channel settings such as CUT, HFA,
CPL, Level, DLY or EQ for all channels correspondingly.
3. After defining all settings, exit the subscreen by tapping the
Home button ( ).
Note: A detailed description of the Input routing is given in
the reference chapter Þ Chapter 10.6. "Input routing"
on page 56.
A detailed description of the Input mode is given in the
reference chapter Þ Chapter 9.2. "Input" on page 34.
d&b D80 Manual 1.9 en 31