d&b D80 - Manual (Page 33)

From the Home screen, selecting the Device view button opens the
Device setup screen with the «Input» tab being active.
The Device setup screen follows the same layout structure as
described above and is split into the Header and the Data
sections.
Using the tabbed structure of the Device setup screen provides
direct access to the desired subscreens.
9.1. Device name
Selecting the centered Information field button
(«Edit device name») in the header of the device setup screen
enables you to enter or edit the device name (maximum length 15
characters).
The input mask which appears allows either lower-case or upper-
case characters by toggling the corresponding button («abc») on
the bottom left.
Wrong entries can be corrected by tapping the Erase button ( )
on the bottom right.
Tapping «OK» on the top right confirms the entry, closes the input
mask and switches back to the Device setup screen.
Tapping the Back button ( ) on the top left cancels any entry and
switches back to the Device setup screen keeping the previous
entry.
d&b D80 Manual 1.9 en 33