Junger Audio d07 - Digital Transmission Processor User Manual

Page 22

Advertising
background image

A 4.1 – Front Panel Operation


LEVEL MAGIC ON

LEVELLER

OPERATING

LEVEL


-40…0dBFS

Desired target level for the levelling process.
Reference Level for the Transient Processor
and Leveller

TR P RANGE


0…15dB

Determines the maximum gain change applied
by the Transient Processor when there are
fast input level changes. Large range values
are reducing the dynamic range, especially in
combination with the transient program “hard”

TP PROG


soft/mid/hard

This parameter describes the characteristic of
gain change by the transient processor. It has
to be chosen dependent on your program
genre. If there are just a few level changes or
you want to keep the original dynamic range
best (e.g. classical music), you have to
choose “soft”. For mixed program “mid” should
be best in most cases. And for live venues
(sport etc.) with frequent unexpected level
changes the adjustment “hard” is required.

SILENCE GATE

= AGC gate


-60… -20dBFS

If the input level falls below this threshold
level, the gain change of the AGC freezes
immediately (transient processor still active).
After appr. 20 seconds input level below
silence gate the current gain change is slowly
moving to the longterm average gain.

LEV TIME

= AGC time


10s…2h

Describes the time of development for the
AGC to reach the maximum possible gain
change (range value).
The ratio of gain change should never be
faster then 3 seconds for 1 dB!! We are
recommending a setting of 4…5 seconds for
1dB gain change by the AGC. Therefore the
AGC time is basically determined by the AGC
range value. A range setting of 10 dB requires
a time setting of minimum 40 seconds.

LEV RANGE

= AGC range


0…40dB

Determines the maximum gain change applied
by the AGC.
AGC Range must be bigger then the expected
difference between the average input level and
the operating level.
If there is for example an average input level
of -23dBFS and your OP-Level is -18dBFS,
the AGC needs at least a range of 5dB. In
most cases an AGC range of 10dB is a good
choice

LEVEL MAGIC OFF

COMPR

COMPR RATIO

OFF/ 1.1 to 4.0

Compresses the audio signal => increase
of loudness, complicated settings are not
necessary because there are diverse
adaptive control algorithms, which can be
accommodated in an optimal way with the
parameter COPM program

COMPR PROG

live, pop, speech, uni, classic

COMPR

RANGE

0 to 20dB



Advertising