Junger Audio d07 - Digital Transmission Processor - Manual (Page 36)

A 5 -Boot display and trouble shooting
Should have remained the device no more operable and/or in the program
execution stand, recommends itself an initialization the device.
During initialization, all storage areas and registers important for the program
are loaded with the factory setup and the program is restarted.
Any button (exceptional >>MENU, Peak up>>) is to be held pressed in order
to initialize the device during power-on of the device until the program has
started. To the start of the program and at the completion of the displays (how
described in 6.1), the device is ready for operation with the factory setup.
After an initialization of the device, all user presets and adjustments are
erased and/or overwritten by the factory setup!
5.3
INITIALIZATION
THE UNIT