Junger Audio d07 - Digital Transmission Processor User Manual
Page 59
B 6 – Network Integration
Then change the settings in order to be able to communicate with the device. You
must choose an IP-address different from that of the device.
Example:
E.g. if the default address of the device is :
IP Adress:
10.110.123.114
Netmask:
255.255.0.0.
Gateway:
10.110.0.1.
You could take 10.110.123.115 as the IP-address (a number close to but not the same
as the device’s address) and the same subnetmask. The gateway is not important
when you are using an Ethernet crossover cable.
When you have changed the settings press OK. Now you will be able to communicate
from your PC to the device by a web browser (IE, FireFox) via the Ethernet crossover
cable. Just type in the device’s IP-address into your browser:
Then you will enter the device's web pages: