Presentation Switchers PS550 - Manual (Page 5)

Page 5 Series 500 Installation Guide
Getting Started
Installation Guide Overview Installation Guide Overview
This manual will provide detailed instruc ons to assist an installer with a typical rack-based
installa on of a Series 500 presenta on switcher. This process is best outlined by the following
steps.
1. Unpack the switcher from the box and separate all components.
2. Install input cards (if necessary)
3. Install the rack moun ng brackets.
4. Mount the switcher in the rack.
5. A ach input and output devices to the switcher.
6. Power up the unit and test the unit manually.
7. Make adjustments to the system as necessary.
8. Test the system again using external control devices as necessary.
Package Contents Package Contents
Below is a list of items enclosed in each Series 500 enclosure.
Quantity Description
1 Series 500 Presentation Switcher
1 Users Guide (PN: DOC-000001-xxx)
1 Installation Guide (PN: DOC-000003-xxx) (This manual)
2 Rack-Mount Brackets, Black
1 4 Connector Terminal Block, Stereo Audio Connector, Speaker Level
1 5 Connector Terminal Block Stereo Audio Connector, Line Level Audio
4 Screws, 1/4-20 X 1/2”, Black Oxide, Philips Head
10 Screws, 4-40 X 1/4”, Black Oxide, Philips Head (for Extras Only)
Installation Tools Installation Tools
1 - #1 & #2 Philips Screw Driver, and,
1 - 1/8” Flat Blade “Tweeker” Screw Driver