TabletKiosk eo a7400 - Manual (Page 112)

94 Appendix A: BIOS Set-up
Security Menu
Supervisor Password
Shows the state of the Supervisor password.
User Password
Shows the state of the User password.
Change Supervisor Password
Sets password to enter and change settings in BIOS. Setting only
this password will not require a password to be entered in order
to boot the system, but a password will be required to enter the
BIOS.
Change User Password
Sets password to allow the system to boot. If no Supervisor
password is set, user will be allowed to enter BIOS without being
required to enter an additional password.
TPM Support
Enables/Disables the Trusted Platform Module.
Phoenix SecureCore Tiano Setup
Main Advanced Security Boot Exit
F1 Help
Esc Exit
 Select Item +/- Change Values
Enter Select  Sub-Menu
F9 Setup Defaults
F10 Save and Exit
Security
Supervisor Password: Cleared
User Password: Cleared
Change Supervisor Password [ Enter ]
Change User Password [Enter]
TPM Support [Disabled]
Phoenix SecureCore Tiano Setup
Main Advanced Security Boot Exit
F1 Help
Esc Exit
 Select Item +/- Change Values
Enter Select  Sub-Menu
F9 Setup Defaults
F10 Save and Exit
Security
Supervisor Password: Cleared
User Password: Cleared
Change Supervisor Password [ Enter ]
Change User Password [Enter]
TPM Support [Disabled]