Televes HD DTT Receiver - Manual (Page 10)

10
High definition DTT adapter
6.1. Switch between TV and Radio channels
- While you are viewing a TV channel, press TV/R on the
remote control to toggle between TV and Radio channels.
- The previous mode can be accessed by pressing the back
key.
6.2. Programme selection
- In order to select a programme use the CH / CH keys ,
the cursor keys / or the numeric keypad (0 ... 9) on
the remote control.
- There is also another way of changing programme in a
clear and comprehensive way. While you are watching a
TV programme or listening to the radio, press the OK key
on the remote control. A list of channels is shown. Select
a new programme from the list with the keys , , o
and press OK.
- Pressing the key the technical information of the
selected programme is shown.
- You can return to the last programme you were viewing
by pressing EXIT.
6.3. Programme information
- Each time you change programme, the corresponding
information will be shown for a few seconds on the
banner section of the screen.
- While you view a programme, you can access this
information anytime by pressing the key on the remote
control.
- When this key is pressed again while the programme
information (banner) is visible, it is amplified and shows
a short summary of the content. If the text occupies more
than one page, use the or keys to move about. With
the or se keys the following event information is
shown.
- Apart from the channel no. and name, current time, start
and end time of both the current and following event, the
banner can present the following icons:
ANTENA 3 HD 14
23.15 - 00.00 Cougar Town
00.00 - 01.30 Todo el mundo odia a Chris: Todo el mundo odia las matemáticas
SUB AUDIO TXT
13 : Estimated indication of elapsed time
of current event in relation to the total
duration.
ANTENA 3 HD 14
23.15 - 00.00 Cougar Town
00.00 - 01.30 Todo el mundo odia a Chris: Todo el mundo odia las matemáticas
SUB AUDIO TXT
13 : Indication of age classification.
6. Basic functions