Televes HD DTT Receiver - Manual (Page 35)

35
EN
Problem Possible causes What to do
There is no sound or
the sound is very low.
(I) - The volume of your TV and/
or adapt er is very low or on
minimum.
(II) - Your TV and/or adapter is on Mute
mode.
(III) - Ensure you connect the cables of
all connected equipment correctly
and securely.
(I) Check the volume of your TV and/or adapt er.
(II) Press the Mute button on your TV and/or
adapter
(III) The SCART connector is not connected
securely.
The image sometimes
appears distorted
or appears blurred
towards the sides.
(I) Screen format configured as 4.3.
If it is transmitting a programme
in 16.9 some televisions lose
synchronisation.
(I) Change the screen format to Letterbox or Pan
& Scan with the the output menu.
The image appears in
pixels (as in blocks)
every few seconds.
(I) You have the amplifier antenna con-
nected to the power supply when
it is not necessary and it saturates
the signal.
(I) Connect the antenna directly to the adapter.