Televes HD DTT Receiver - Manual (Page 20)

20
High definition DTT adapter
Activate antenna:
If you are using an active antenna (with amplifier) you
must activate this option to supply power to the amplifier
with +5V /100mA. Voltage is supplied up the coaxial cable
connected to the ZAS HD input labelled RF IN.
- Select the mode “Activated” through the
or keys.
- If no amplifier is available, the option
“Deactivated” should be selected; otherwise, you
can damage the ZAS HD.
Digital Volume Adjustment:
It is used to calibrate the audio values represented by the
bar sound.
Its attenuation ranges from 0 to 20 dB.
11.3. Regional Settings
Through this menu you can select the zone where is the
adapter and how to select the time zone.
Country:
- Select the country where the adapter is installed with the
or keys . The available options are: Spain, Portugal,
France and Italy.
Timezone selection:
- Select between “Automatic” and “Manual” with keys
or
. In the “Automatic” option, the receiver displays the
time supplied by the service provider. In “Manual” mode
you can change the off set time sent by the supplier and
adapt it to local time.
11.4. Language Settings
Through this menu you can select the language of the
screen menus, the audio default language and the subtitle
language.
Menu language:
- Select the screen menu language by pressing MENU via
the or keys . The available languages are: Spanish,
Italian, Portuguese, French and English.