Xtramus NuApps-MultiUnits-RM Ver1.5 - Manual (Page 177)

E. Criteria
• Allowable Tolerance: You can set the allowable amount packet loss/excess here.
¾
Total Packet Loss: If packet loss (including error packets) is higher then the value you set
here, the test result of the DUT will be fail.
¾
Total Packet Excess: If packets excess (including error packets) is higher then the value you
set here, the test result of the DUT will be fail. Packet excess happens when packet
transmission is bad and packets are resend multiple times, causing the amount of received
packets is more than sent packets.
F. Misc
• Title of Task Name: You can assign a name to this task for identification.
• Apply: Apply the changes you made.
G. Help
All test variables used for this task and their definitions will be listed here for reference.
177
E-mail: [email protected]
Website: www.Xtramus.com
XTRAMUS TECHNOLOGIES ®