Xtramus NuApps-MultiUnits-RM Ver1.5 - Manual (Page 40)

E. Auto Start
NuApps-MultiUnits-RM will halt and wait for further
instructions after the current running task is completed. You
can click the check- box in this section so that
NuApps-MultiUnits-RM will start the next task automatically.
Also, you can set how many seconds shall
NuApps-MultiUnits-RM be waiting before starting the next
task in the field down below (Waiting Time).
F. Log Folder Path
As mentioned in “D. Log – File Name Setting”,
NuApps-MultiUnits-RM creates test result logs and stores
these logs automatically to designated folders.
You can set where you want to save the test logs by the
scroll-down menu.
• Default Log Folder: Test logs will be saved to the
default log folder.
• DUT’s Model Folder: Test logs will be saved to
where DUT test settings are saved.
• User Defined Folder: Test logs will be saved to the
designated file path you input in the Path field down
below.
If you enable Export to PDF report function, you will be
able to save the running result report in PDF format.
G. Others settings
By connecting a barcode reader to your PC, you can scan
pre-defined barcodes with the barcode reader. Information
such as DUT Task Settings, Operator ID and DUT MAC
Address can be read by barcode reader and input into
NuApps-MultiUnits-RM.
Besides, you can enable the Automatic Acquisition Of MAC
function for system to search for you the MAC address. And
also you can set manually the device under test’s IP from DUT
IP.
If you click the Setup button, an Options Dialog window will
pop up, which allows you to type your preference on FAB,
Station, Operator ID, DUT and Note. Besides, you can set the
number count of your DUT’s MAC address and S/N.
Please click the Ok button when you are finished with the
settings, or click Cancel to exit this window without saving.
40
E-mail: [email protected]
Website: www.Xtramus.com
XTRAMUS TECHNOLOGIES ®