Xtramus NuApps-MultiUnits-RM Ver1.5 - Manual (Page 251)

When you click the button to start a task running, the Window task frame will blink green as shown
down below:
Meanwhile, a window will pop up for you to fill the MAC address and SN of your Device under Test (DUT).
The SN and MAC count number is based on the settings you made on Environment, please refer to the
4.2.1. Environment Settings.
Please note that the Window task will only start to operate after confirming this window’s settings. Please
fill the SN and MAC address and click OK button to confirm. If you don’t want to fill the SN and MAC
address, you can click the Skip button to start directly the Window task operation, or click Stop button to
cancel running the task.
251
E-mail: [email protected]
Website: www.Xtramus.com
XTRAMUS TECHNOLOGIES ®