Xtramus NuApps-MultiUnits-RM Ver1.5 - Manual (Page 250)

6. Run Test, Test Result & Report
When you finished with the previous settings, you will return to the Window task interface as shown down
below:
Depending on the number of the Window tasks that you set previously from the 4.2.2. Select Port
Settings, there will be number of Window task available for running test. The available Window task has
the light green with the Waiting… signal on the Window task. For Not available Window task, it
has with the Unused signal on the Window task.
Please click the button to start running all previously set tasks from the 4.2.2. Select Port Settings
for each Window task. You can pause the running by click the button, and continue by click the
again.
250
E-mail: [email protected]
Website: www.Xtramus.com
XTRAMUS TECHNOLOGIES ®