Artesyn System Services Framework Installation and Use (November 2014) - Manual (Page 33)

SSF Installation
System Services Framework Installation and Use (6806800S58E) 33
In the RPM command above, replace the strings <Blade>, <version>, and <arch> with the
blade name on which sysLCU to be installed, version number of
SSF , and the architecture
respectively. For example, if the sysLCU to be installed on PrAMC-7311 blade, then the RPM
command to be executed is:
rpm -ivh syslcu.pramc7311-3.2-1.noarch.rpm
For more details on System Log Collection feature refer Appendix A, System Log Collection
.
Blade SSF core is an agents to SSF on respective blades and have to be installed on that blades
only. For example, blade SSF core for ATCA-F140 has to be installed on ATCA-F140. Name of the
target blade is included in the blade SSF core RPMs.
For example, ssf_bcsim_rel_atcaf140-2.3.38.ppc.rpm is for ATCA-F140 blade.
1. Copy the following RPM to the blade where blade SSF core to be installed:
ssf_bcsim_rel-<Blade>-<version>.<arch>.rpm
2. Run the following RPM command:
rpm -ivh ssf_bcsim_rel-<Blade>-<version>.<arch>.rpm
In the RPM command above, replace the strings <Blade>, <version>, and <arch> with the
blade name on which blade
SSF core to be installed, version number of SSF , and the architecture
respectively. For example, if the blade SSF core to be installed on ATCA-F125 blade, then the
RPM is:
rpm -ivh ssf_bcsim_rel-f125-1.0.19.ppc.rpm
After the installation, all blade SSF core binary and configuration files are installed on the blade
at the /opt/ssf location. The directory structure is described in the following table.
Table 3-3 Directory Structure of Blade SSF Core
Folder Description Files
/opt/ssf/bin/
Contains binaries of blade SSF
core agent.
ssfbcsimd
/opt/ssf/etc/confi
g
Contains configuration
information of blade SSF core
agent.
S99SsfBcsimRun<Blade>.sh
bcsim